Errol
Razor Review Guru
Maxwell June Double Edge (USA)
It’s a strange old game this buying first release razors, sometimes you can get burnt. On hearing of any razor release I like to be in early to get one from the first batch, that’s exactly what was done with this release from Maxwell June. Great, mine is on the way, then I’m advised that there are three different efficiency caps available, yes you read it right, Maxwell June adjust their efficiency level by swapping the cap. When I ordered mine, there were no options, so I asked Maxwell June to confirm that mine is the regular cap. Rob from Maxwell June advised: ‘The MJ that you have is our mid level of exposure. It is neutral. The EX is slightly positive and the SX is slightly negative. Both are marked on the top cap with these letters. We don’t change the blade gap between the different top caps’. I didn’t really want to hear that mine was neutral exposure, there’s nothing that can be done about it now, so I’ll check it out.
I could not help but notice the similarities to the cap on the Errolized version of the TRC Double Edged Razor and this one, wide machined flats (with some curvature). And the other part I like is the relief at of the back of the plate as I suggested for the TRC, no hole in the handle though. A drilled out end on the handle would have reduced the weight considerably and resulted in a razor that weighed in under the 100g threshold. Round blade posts are positioned on the cap, and these protrude through the plate to sit proud at the back of the plate. Long channels down each side of the plate clear the lather leaving a thin edge that looks vulnerable to knocks and bumps. Clamping of the blade is taken care of by a machined edge of the raised section of the plate in conjunction with the wide flat on the cap. With dry hands the grip of the handle is slippery, probably due to how shallow the knurling is, hopefully wet hands will assist with grip. There has been no further processing of the finish after being removed from the CNC machine, but it does present as a satin finish with very few machine marks visible on the outer surfaces, however machine marks on the inner sides of the head are displayed for the whole world to observe.
All my negativity and the doubts I exhibited regarding the use of a razor with neutral blade exposure were wiped away during the first stroke. This razor has a unique feel, different to any razor I’ve used previously, there was no sensation of the blade working, it simply wipes the whiskers away, so safe and comfortable, I really appreciated that. Efficiency was on the lower side of Karve CB level #D and the effectiveness of the shave must be experienced to be really appreciate. This is the smoothest and most comfortable razors it’s ever been my pleasure to use in a long time. There were no grip issues with the handle, but the whole razor would benefit from the handle being lighter, much lighter; this razor is crying out for a titanium handle. There is no need for me to go searching for an EX plate, the MS done all I require from a razor, but there is every chance I will chase one down to try. At some time I would like to see the release of a premium version of the Maxwell June with a drilled out or preferably, a titanium handle; if Maxwell June don’t do one, I might have to work on one for myself, this razor would reign supreme.
Blades Used – Kai and Gillette Platinum
Material – 316 Stainless Steel
Weight – 105.8g
Blade Tab - Exposed
Head Width – 43.61mm
Handle Length – 83.90mm
Handle Diameter – 13.18mm
Availability – Maxwell June
Final Word – Superb shaver
It’s a strange old game this buying first release razors, sometimes you can get burnt. On hearing of any razor release I like to be in early to get one from the first batch, that’s exactly what was done with this release from Maxwell June. Great, mine is on the way, then I’m advised that there are three different efficiency caps available, yes you read it right, Maxwell June adjust their efficiency level by swapping the cap. When I ordered mine, there were no options, so I asked Maxwell June to confirm that mine is the regular cap. Rob from Maxwell June advised: ‘The MJ that you have is our mid level of exposure. It is neutral. The EX is slightly positive and the SX is slightly negative. Both are marked on the top cap with these letters. We don’t change the blade gap between the different top caps’. I didn’t really want to hear that mine was neutral exposure, there’s nothing that can be done about it now, so I’ll check it out.
I could not help but notice the similarities to the cap on the Errolized version of the TRC Double Edged Razor and this one, wide machined flats (with some curvature). And the other part I like is the relief at of the back of the plate as I suggested for the TRC, no hole in the handle though. A drilled out end on the handle would have reduced the weight considerably and resulted in a razor that weighed in under the 100g threshold. Round blade posts are positioned on the cap, and these protrude through the plate to sit proud at the back of the plate. Long channels down each side of the plate clear the lather leaving a thin edge that looks vulnerable to knocks and bumps. Clamping of the blade is taken care of by a machined edge of the raised section of the plate in conjunction with the wide flat on the cap. With dry hands the grip of the handle is slippery, probably due to how shallow the knurling is, hopefully wet hands will assist with grip. There has been no further processing of the finish after being removed from the CNC machine, but it does present as a satin finish with very few machine marks visible on the outer surfaces, however machine marks on the inner sides of the head are displayed for the whole world to observe.
All my negativity and the doubts I exhibited regarding the use of a razor with neutral blade exposure were wiped away during the first stroke. This razor has a unique feel, different to any razor I’ve used previously, there was no sensation of the blade working, it simply wipes the whiskers away, so safe and comfortable, I really appreciated that. Efficiency was on the lower side of Karve CB level #D and the effectiveness of the shave must be experienced to be really appreciate. This is the smoothest and most comfortable razors it’s ever been my pleasure to use in a long time. There were no grip issues with the handle, but the whole razor would benefit from the handle being lighter, much lighter; this razor is crying out for a titanium handle. There is no need for me to go searching for an EX plate, the MS done all I require from a razor, but there is every chance I will chase one down to try. At some time I would like to see the release of a premium version of the Maxwell June with a drilled out or preferably, a titanium handle; if Maxwell June don’t do one, I might have to work on one for myself, this razor would reign supreme.
Blades Used – Kai and Gillette Platinum
Material – 316 Stainless Steel
Weight – 105.8g
Blade Tab - Exposed
Head Width – 43.61mm
Handle Length – 83.90mm
Handle Diameter – 13.18mm
Availability – Maxwell June
Final Word – Superb shaver
