At this stage I don't have them divided up, just razors side by side it holds probably 15.
I plan to set up dividers to keep them from falling over and capacity maybe reduced to 10 at a guess.
-
Domain Change - We have moved to https://paste-and-cut.com as our new domain.
If you are using shortcuts or bookmarks for the old paste-and-cut.com.au domain, you need to update these or they will cease working from the 25th January, 2025. Please check the notice post for more details on this change to the forum.
Razor storage
- Thread starter Rami
- Start date
At this stage I don't have them divided up, just razors side by side it holds probably 15.
I plan to set up dividers to keep them from falling over and capacity maybe reduced to 10 at a guess.
Or you can get one at Men's Biz for $160 which is not cheap 
The handcrafted varnished beech wood box has a removable wooden tray to hold seven straight razors with a blade depth between 4/8" to 7/8".
http://www.mensbiz.com.au/shaving/cases/thiers-issard-seven-razor-display-box.html
The handcrafted varnished beech wood box has a removable wooden tray to hold seven straight razors with a blade depth between 4/8" to 7/8".http://www.mensbiz.com.au/shaving/cases/thiers-issard-seven-razor-display-box.html
Mark1966
Canberra dwelling Happy Clapping Bean Counter
Staff member
Site Moderator
Grand Society
2016 Sabbatical Fail
2018 Charity Auction Winner
2019 Charity Auction Winner
2020 Charity Auction Winner
Or you can get one at Men's Biz for $160 which is not cheap
http://www.mensbiz.com.au/shaving/cases/thiers-issard-seven-razor-display-box.html
Is Thiers Issard.
Is not cheap.
5 for $30 delivered. http://www.ebay.com.au/itm/182016799381
For dividers at this stage I plan to get some thin timber, hard balsa if I can get it, and just cut it into squares. They would be glued in at each end. Thicker timber for the tang end to give me a thinner gap. Since the box is longer than straights, there would be front to back divider to give me the correct width, and a spot for the desiccant gel packets. I would try and line the whole thing but that might be too hard. I may end up with felt only up the middle between the dividers. Still working over ideas in my head for this.
An example;
For dividers at this stage I plan to get some thin timber, hard balsa if I can get it, and just cut it into squares. They would be glued in at each end. Thicker timber for the tang end to give me a thinner gap. Since the box is longer than straights, there would be front to back divider to give me the correct width, and a spot for the desiccant gel packets. I would try and line the whole thing but that might be too hard. I may end up with felt only up the middle between the dividers. Still working over ideas in my head for this.
An example;
Havachat45
Member
My avatar is a photo of my new storage box - I've put about 200 in there and there is still plenty of room - it's bigger on the inside
